Jesper Berg While the next SATA standard, SATA Express, is on the horizon, it is not ready for prime time just yet. Meanwhile, the SATA 6 GBps interface is largely saturated by most high-end SSDs today, so your options if you want greater speeds are either a PCIe drive or hooking up two or more drives with RAID striping. Two drives in RAID 0 using an integrated RAID controller is an affordable, although not fault-tolerant, way of boosting those transfer rates.
Introduction
In this review, we will take a look at how the Intel 330 performs in RAID 0. The 330 series barely needs an introduction; it is another range of SandForce SF-2281 based drives from Intel and basically a consumer-oriented version of the 520 series. It’s not quite as fast but still offers more than enough performance for most home users and workstations. One drawback, particularly for professional users, is the shorter warranty period of 3 years instead of 5.
Compared to the newer 335 series, the 330 consists of older (but better) 25nm NAND instead of the less durable 20nm modules found in the 335, making the 330 the best option hands down at the drives’ current price points.
What sets the 330 apart from the host of other SSDs with the same controller is that Intel’s drives use a proprietary firmware that is supposedly more reliable. This may not be entirely true at all times, but the 330 has been thoroughly tested and there haven’t been any major hiccups thus far.
Also, the 330 uses synchronous NAND instead of asynchronous like some other affordable drives. For these reasons, Intel drives sell at a small price premium to other, similar drives with the SandForce 2281 controller.
Test setup:
Gigabyte GA-Z77N
Intel Core i7-3770K 3.5 GHz
Kingston HyperX XMP Red 1600MHz (2x8GB)
2x 180 GB Intel 330 SSDs, firmware version 330i
Intel SATA RAID Controller version 11.1.0.1006
Windows 8 Pro
But let’s move on to the results…
ATTO
ATTO is a tried and tested tool for measuring maximum disk performance and the dual 330 drives perform as expected here. The 330 is rated at 500 MB/s and 450 MB/s, respectively, so the resulting read transfer rates of more than 1,000 MB/s may seem exceptional. However, many SSDs exceed their rated specs in this “best-case scenario” as it uses compressible data. Nevertheless, considering the cost of these two drives, anything above 1,000 MB/s is, of course, great and close enough to the upper limits of the SATA 6Gb/s interface.
CrystalDiskMark
So far so good. And with compressible data (0 fill):
Many SandForce-based drives have a tendency to display fantastic results in benchmarks where the data is highly compressible (see: ATTO) but deliver mediocre performance in incompressible transfers. The performance reduction with the Intel 330 in RAID 0 is indeed noticeable in terms of write speeds.
AS SSD
AS SSD is also an incompressible test and confirms the numbers from CrystalDiskMark in the write transfer part, which is rather low as expected, but the total score of 1,184 is still a very impressive. And in IOPS format:
AS SSD now also includes a compression test:
Single 330 Vs. 330 in RAID 0
Pairing two drives in RAID 0 does not translate to an exact doubling of performance, but in this case, it’s fairly close.
Summary
3.5″ trays are included with the 330 drives
The numbers speak for themselves–two Intel 330 SSDs in RAID 0 over an integrated RAID controller perform very well. The weakness in incompressible write transfer rates is to be expected and doesn’t really detract from the overall impression that this is an incredibly cost-effective way to get great performance in your average desktop system.
